View source for Services and addresses

Every address for the ScotMesh node in one place. This is the page to copy from; each service is explained on its own page.

== Entry points ==

{| class="wikitable"
! Way in !! Address !! Notes
|-
| TCP || <code>rns.scotmesh.net</code>, port <code>4242</code> || The normal route. Interface type <code>TCPClientInterface</code>. See [[Connecting to ScotMesh]].
|-
| I2P || <code>a3pswrtvpuro62ijhb7lwdt2n6aqgajglof27ynbonynmolzlz7q.b32.i2p</code> || For networks that block outbound connections. Interface type <code>I2PInterface</code>. See [[Access over I2P]].
|-
| LoRa || ScotMesh 868 radio profile || Within range of a gateway only. See [[RNode]].
|}

== Services ==

{| class="wikitable"
! Service !! Address !! Reached from
|-
| Chat hub (RRC), room <code>scotmesh</code> || <code>004e5a15da221d9a236b0e8d74195f13</code> || MeshChatX, Ratspeak, rrc-tui, rrc-gui, WeeChat, Eridanus. See [[The chat room]].
|-
| LXMF propagation node || <code>c283b754e0acc11ce48d2f5e29167e0c</code> || Sideband, MeshChatX, Nomad Network, usually picked automatically. See [[Propagation node]].
|-
| Nomad Network node || <code>10a839df2c50635bcb0c8a299b9ca0f8</code> || Nomad Network, MeshChatX. Entry page <code>10a839df2c50635bcb0c8a299b9ca0f8:/page/index.mu</code>. See [[Nomad Network]].
|-
| Transport instance || <code>20b962cd814444f7812e409e7c47f319</code> || Not something you connect to: it is the node's own identity, and what appears in <code>rnpath</code> output and on node maps. Announced as “ScotMesh Backbone”.
|}

== Radio profile ==

Every radio on the network must use exactly these settings; see [[RNode]] for why.

{| class="wikitable"
! !! ScotMesh 868
|-
| Frequency || 869.4625 MHz
|-
| Bandwidth || 125 kHz
|-
| Spreading factor || 9
|-
| Coding rate || 4/5
|-
| TX power || 22 dBm
|}

== Which addresses could change ==

* The '''hostname and port''' are stable.
* The '''destination addresses''' (chat hub, propagation node, Nomad Network node, transport instance) are derived from identity keys the node keeps backed up. They would only change if a key were lost or deliberately replaced, and we would say so here and on [https://rns.scotmesh.net rns.scotmesh.net].
* The '''I2P address''' is derived from a random key. It is backed up too, but of all the addresses it is the one most likely to change one day, so check here if it stops working.

[[Category:The ScotMesh Backbone]]